Pantera # 4656: New project with BMW V8 power

Now i have had time to concentrate on the doors and made new bottom part and the part just under the side window

Upper part sandblasted and epoxy primed ready for new sheet metal

Another

Final result

I had to make a new power window system because of the one pice side windows. So they have room to move inside the door!

This is what i had to do to change to one pice side window

measurements

I took a pice from the middle of the old window guide

Another view

The glass factory had problem to get enough radius on the glass . It had something to do with the hardening process. but when they had tried a few they got it pretty near. But i had to take a little radius of the window frame(straitening) and make a little more radius on the vertical lifting mechanism! So now its working good!
and the glass is also E-marked =legal

Now i have started to repair the rear deck lid it is in very poor condition. there has been some air vents that somebody has filled in.

Now i have some work to do

I have to shorten the lid 90mm to get room for air intake

Now done

Rear part was also very bad

Done