Here is 2 pic`s of the air grills. it is strange how the rear fender looks wider with the open grills !20160821_103858_[640x480)

Attachments

Images (1)
Last edited by kimk

This weekend i have made a new front crossbeam and radiator supports and started on new light buckets.20160904_183918_[500x375)

Attachments

Images (1)
Last edited by kimk

This is the old one very poor done and only 0,6mm thick. and no paint or rust protection on the inside!20160903_171347_[500x375)

Attachments

Images (1)
Last edited by kimk

I have also worked at the rear wheel wells. and there is same problem,they have tried to repair it.20160521_201057_[640x480)

Attachments

Images (1)
Last edited by kimk

Here is rear crossbeam done in 3mm thick! so now it is a good place to lift! later i bolt on a 20mm thick plastic plate!20160812_200432_[450x600)

Attachments

Images (1)
Last edited by kimk
now i have got a little done again. now when the winter is coming the body really need to get som epoxi protection and all the structural work is done.
so i first washed away all the residue from the soda blasting and then sand blasted all remaining rust and last a epoxi layer

My spray booth drying robot was good to dry all the water after pressure washing20160908_092812_[500x375)

Attachments

Images (1)
Last edited by kimk

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×