Skip to main content

Replies sorted oldest to newest

Hi Ian, I've struggled with the same issue and wanted to relay my experience.  For the m/c I WOULD have gone to Sierra but they closed some time back  So Instead I went to White Post restorations in Va and was very happy with results.  I'd call to confirm they can address a stock Pantera m/c diameter if that's what you have.  Mine was a non-stock 25.4mm (1.000") Benditalia unit that looks original and has exactly the same parts inside, only a few of larger dia.  Had 2 similar masters done by them this year.

As for calipers I have had various sets of ATE & Girling calipers done at PMB Performance in Utah.  Check out their website, they are ATE specialists and have connections with a great plating shop in their area.  So they plate mounting hardware properly, too.  It's been a few years now but hopefully they are as good now as they have been previously!

I've been very disappointed in mc/ sleeving work done by some other shops you would probably recognize so there could be a crap shoot element to this.  Regards, Nate Stevens

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×