Skip to main content

This is regarding the Pantera project that I received in February.  The car came without the factory mount for the swirl tank.  They removed the factory tank mount and I think they were planning on "deleting" the swirl tank and instead use the aftermarket filler neck that sort of levitates.  The factory mount for the overflow tank is alive and well.  In any case, I would like to go back to the factory setup or similar if possible.  Ideas anyone?

Attachments

Images (1)
  • mceclip1
Original Post

Replies sorted oldest to newest

@haydude posted:

Steve,

I've got one on an old inner panel I was going to use to repair the damaged one I have. I might be able to cut it out. It would need to be welded in or maybe there is another option.

Ken

Hi Ken,

Wilkinson did not have this bracket.  It would be great if I can get yours.  It looks like you can get it out either of two ways.

1.  Cut that piece of the inner fender out and leave the bracket welded to the cutout piece of fender.

2.  Just cut the two corner welds and bracket will come right off.

Thanks, Steve

Attachments

Images (1)
  • mceclip0

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×