Skip to main content

17 replies

Sheet metal parts.

Replies sorted oldest to newest

kjeldpedersenkjeldpedersenMember
Thanks Mark.

I think i talk with Jerry Mooberry around one year ago about some parts for 9053.
He have a lot of parts, but the prices is over my budget. As i remember one fender 5000USD.(one not four fenders)

But thanks for the info.

Kjeld.

quote:
Originally posted by 1Rocketship:
Hello Kjeld; This person "Jerry" has A LOT of Factory "NOS" ( New Old Stock) DeTomaso Pantera sheet metal...

He posted here on Pantera International.


Here is Jerry's craigslist ad...

https://phoenix.craigslist.org.../pts/4784189687.html

Jerry is located in Washington state.

Here is Jerry's phone number 206-372-1536.

Remember to "Bargain"!!!...Mark
R 1Rocketship (Guest)
quote:
Originally posted by Kjeld Pedersen:
Thanks Mark.

I think i talk with Jerry Mooberry around one year ago about some parts for 9053.
He have a lot of parts, but the prices is over my budget. As i remember one fender 5000USD.(one not four fenders)

But thanks for the info.

Kjeld.

quote:
Originally posted by 1Rocketship:
Hello Kjeld; This person "Jerry" has A LOT of Factory "NOS" ( New Old Stock) DeTomaso Pantera sheet metal...

He posted here on Pantera International.


Here is Jerry's craigslist ad...

https://phoenix.craigslist.org.../pts/4784189687.html

Jerry is located in Washington state.

Here is Jerry's phone number 206-372-1536.

Remember to "Bargain"!!!...Mark
Hello Kjeld; Jerry has to come to the realization that he is selling sheetmetal NOT GOLD in regards to his pricing, Jerry obviously has NOT achieved this "Self-Enlightenment" ...Mark
demopuardemopuarMember
Have you tried Steve Wilkinson in Paramount, CA? I know he just found a bunch of New Old Stock sheet metal at the factory in Italy. I don't know what he really has or the pricing -- but it may be a resource to at least check. The best way to get in touch with him is by giving him a phone call. He is not good at getting back via email. You can look up his phone number at his website Pantera's by Wilkinson.

Best of luck.

Mark
joulesjoules"Racing is Life, anything before or after is just waiting" - Steve McQueen

Kjeld,

I admire your spirit, but honestly think you should be looking for another wrecked car and use one of the two as the donor. It will probably work out cheaper than trying to find and purchase parts piecemeal, shipping etc.

For example Beverley Hills Car Club had this car reduced to around $15,000 over Christmas and they do seem to get low end cars with parts missing with regularity. Something like this could provide most of what you need or vise versa.

http://www.beverlyhillscarclub...-pantera--c-2552.htm

Also contact Larry Stock at Pantera Parts Connection in Carson City NV, he had two or three wrecked Pantera bodies he was slowly stripping sheet metal off of. Prices are not likely to be cheap though.

Good luck,
Julian

Last edited by joules
R 1Rocketship (Guest)
quote:
Originally posted by Joules:
Kjeld,

I admire your spirit, but honestly think you should be looking for another wrecked car and use one of the two as the donor. It will probably work out cheaper than trying to find and purchase parts piecemeal, shipping etc.

For example Beverley Hills Car Club had this car reduced to around $15,000 over Christmas and they do seem to get low end cars with parts missing with regularity. Something like this could provide most of what you need or vise versa.

http://www.beverlyhillscarclub...-pantera--c-2552.htm

Also contact Larry Stock at Oanktera Parts Connection in Carson City NV, he had two or three wrecked Pantera bodies he was slowly stripping sheet metal off of. Prices are not likely to be cheap though.

Good luck,
Julian
Hello Julian; Through some Dick Tracy like detective work I tracked down & spoke with the owner of the Pantera being sold at Beverly Hills Car Club.

A Mr. Michael DiGonis ( VERY NICE GUY on the phone). The Pantera in question was raced at Bonneville SALT Flats, and despite Michael's best efforts to remove all the salt that worked it's way into EVERY nook & cranny, Michael was unsuccessful & as a result the Pantera has more HOLES & RUST than imaginable.

I would venture to state with reassurance that every sheet metal/body part that Kjeld needs for his restoration would NOT come from the Beverly Hills Car Club Pantera...Mark
kjeldpedersenkjeldpedersenMember
Hi Mark.

Thanks, i will try and call Wilkinson in Next week and see what he have.

Kjeld

quote:
Originally posted by DeMopuar:
Have you tried Steve Wilkinson in Paramount, CA? I know he just found a bunch of New Old Stock sheet metal at the factory in Italy. I don't know what he really has or the pricing -- but it may be a resource to at least check. The best way to get in touch with him is by giving him a phone call. He is not good at getting back via email. You can look up his phone number at his website Pantera's by Wilkinson.

Best of luck.

Mark
kjeldpedersenkjeldpedersenMember
Hi julian.

Thanks.

The one at Beverlyhillscarclub is over my budget, just for getting parts for the front. And i am afraid that Mark(1Rocketship) is right about the rust.

I will try to contact Larry Stock in Next week and se what he have.
P.s. haw far away is he from your place?

Kjeld.

quote:
Originally posted by Joules:
Kjeld,

I admire your spirit, but honestly think you should be looking for another wrecked car and use one of the two as the donor. It will probably work out cheaper than trying to find and purchase parts piecemeal, shipping etc.

For example Beverley Hills Car Club had this car reduced to around $15,000 over Christmas and they do seem to get low end cars with parts missing with regularity. Something like this could provide most of what you need or vise versa.

http://www.beverlyhillscarclub...-pantera--c-2552.htm

Also contact Larry Stock at Oanktera Parts Connection in Carson City NV, he had two or three wrecked Pantera bodies he was slowly stripping sheet metal off of. Prices are not likely to be cheap though.

Good luck,
Julian
joulesjoules"Racing is Life, anything before or after is just waiting" - Steve McQueen
quote:
Originally posted by Kjeld Pedersen:
Hi julian.

Thanks.

The one at Beverlyhillscarclub is over my budget, just for getting parts for the front. And i am afraid that Mark(1Rocketship) is right about the rust.

I will try to contact Larry Stock in Next week and se what he have.
P.s. haw far away is he from your place?

Kjeld


Kjeld,

Depends which place; I relocated to Calgary for my job, but still have a home in Reno. Larry's shop is 25 miles from the Reno home and roughly 1,300 from Calgary Smiler I've driven Reno-Calgary and back in the past 3 months and I'm currently back in Reno for the holidays and some vacation working on the house and cars!

Julian
R 1Rocketship (Guest)
quote:
Originally posted by Joules:
Kjeld,

Maybe this is the answer to your needs for sheet metal;

http://www.ebay.com/itm/De-Tom...53&pt=US_Cars_Trucks

Julian
Hello Julian; I have spoken to the owner of this Pantera.

He shows pictures of the Pantera WITH DOORS, DECKLID, HOOD, & then in the fine print states the Pantera comes WITHOUT THESE ITEMS!!!

Must be very GOOD reasons that car has been listed for sale for OVER 6 MONTHS & NO BUYER!!!
I did NOT get a "Good Feeling" from the seller!...your opinion & mileage may vary...Mark

Add Reply

Views: 1,177
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×