Skip to main content

Here is a simple and low cost method to refinish the Pantera shift knob.  I bought enough material on eBay for $4 shipped to refinish four knobs.  The material is 1.5" shrink tubing and it produces a very nice finish.  The tubing shrunk perfectly using a heat gun and I also used an exacto knife to trim the excess material.  The refinished knob is on the left and it looked worse than the worn out knob on the right.  The shrink tube material is in the middle.  You will need remove the old material before applying the new shrink tubing.

IMG_2896

Attachments

Images (1)
  • IMG_2896
Last edited by stevebuchanan
Original Post

Replies sorted oldest to newest

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×