Skip to main content

Does anyone have a photo of how a "original" tacho looks inside?

I've had a electrical issue with mine working fine until I put the lights on, at which time the needle goes dead. The indicator, light and high beam lights have never worked so I thought it was time to check it all out.

Looked behind it to find all the ancillary lights have been pulled out and left hanging in the back of the dash so that's good news - but there was a 4 core cable hanging out of one of the ancillary light holes jury rigged into the cable loom.

Pulled tacho out, found that it had been pretty much gutted and had new internals fitted to clearly accomodate the MSD ignition system which is in some ways logical - but messy.

So, looking to see what an original tacho looks like to see if I can make what I have do what it needs to (in terms of ancillary lights) or do I need to get an original replacement with the MSD signal converter....
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×