Hello All.
I've read the website Pantera Place's information and procedure for applying a fresh coat of undercoating to the wheel wells and underbody.
Since then I've also read and watched videos touting undercoatings using everything from Truck Bed Spray Liner to Rubberized Coatings for the under side of vehicles.
Does anyone know what was used by the Factory or what is the best of today's offerings,
Thanks in advance.
Replies sorted oldest to newest
If you want to do it yourself, you can't beat Eastwood products. They even have a extendable tube to get inside frame box sections.
I do wish to do it myself with a roller and a brush.
Is there an Eastwood Product that you recommend?
Look here:
https://www.eastwood.com/paints/rust-solutions.html
https://www.eastwood.com/paint...er-car-coatings.html
It's all good stuff, just depends on how you want to apply it. You will need to spray as well as brush if you want to get thorough coverage. A roller won't do much good, as there are not really any flat surfaces.
Great...just what I need...Thanks
One more tip, you will find brushing up side down extremely messy as it runs all over your hand. I sprayed all of mine.
The undercoating is that thin and runny?
Did you use the aerosol can or a pro sprayer?
Yes, spray a few coats is the bet method. Aerosol cans.
