Skip to main content

Replies sorted oldest to newest

After all these years the charcoal is usually loaded and of no benefit.

If you need a vapor trap I'd suggest just fabricating one. It's as simple as a piece of threaded pipe and two end caps with hose barbs in them and filled with activated carbon. The alternative is to purchase a small coolant bottle and fill it with activated carbon. Easy to change the carbon every couple years.

Julian
I would recommend everyone update with a roll over valve on the tank or in line in the hose, but this means the hose probably cannot be under vacuum as it will cause the ball to shut in the valve and block the relief air supply.

Are you tee'd into a true vacuum or the air filter? Personally I would not connect the hose to vacuum, you are sucking fuel out one end and the air out the other, something's gotta give either the tank collapses (and it has happened) or fuel starvation.

Julian
Last edited by joules
Post
×
×
×
×
Link copied to your clipboard.
×