Wanted Detomaso plaque

pantera2040Member

I want to install the detomaso plaque on my rear crossmember my buddy is gongto fab me the stanless steel plate to go underneath it. does anyone have a decent one they can sell me for less than the vendor price? I have a very nice chrome script detomaso logo and a single petina'd oem ghia logo (minor pitting to metal no cracks) posts intact I would be willing to trade.

4/10/072:16 PM

❤️ 0

Original Post

Replies sorted oldest to newest

4nford"Live wrong and Perspire"

Ebay:

http://cgi.ebay.com/ebaymotors/DeTomaso-Pantera-Valve-C...dZ1QQsspagenameZWD1V

4/10/075:05 PM

❤️ 0

garth66"When speed is the only thing that counts"

The same thing is only $45 at Hall Pantera:
DeTOMASO CASTING- Mounts on rear frame plate.........45.00
http://www.hallpantera.com/catalog.htm

4/11/078:36 AM

❤️ 0

joules"Racing is Life, anything before or after is just waiting" - Steve McQueen

quote:
The same thing is only $45 at Hall Pantera:

Look in the monthly specials section and it is on special at only $32 + S/H at the moment!!!

4/11/0711:01 AM

❤️ 0

pantera2040Member

Good lookin out Julian just ordered one. That said I will trade all of the above parts plus a pantera script logo for momo hub once I have had then traced for my tattoos (forearms opposing getting power by ford above my right buttcheek). Of course one of you guys could jump in and show me where thats on special (the hub)somewhere else too.
Thanks
Ryan

4/11/071:40 PM

❤️ 0

garth66"When speed is the only thing that counts"

FWIW, I recommend fastening the DT casting plate to the rear crossmember with rivets. I've heard tales of these falling off cars when they were mounted with screws or adhesive. The rivets are small, and when touched up with black paint they're nearly invisible unless you get real close.