Skip to main content

Closed1 reply

ZF Tools Advice Sought

G Guest
Hello, Any special or unique tools are needed to open up a Pantera ZF
transaxle. I'm considering buying a Pantera that appears to need a 2nd gear
synchro ring. I've rebuilt Ford T-10 and Muncie 4-speeds, but never have
tackled something like the ZF. I just want to get at the synchros and
inspect the rest of the parts for wear if I buy this car. Please advise.

Regards,

Ron Lee
Dayton OH
Original Post
LB Lloyd Butfoy (Guest)
[QUOTE]Originally posted by Lloyd Butfoy:
[B]First you should pick up a manual from one of the vendors and look it over.In the manual
it has all the tools,but they are no longer available,you will get a good idea of what you will need to improvise for tools, like
a block of wood with two holes to use as a jig in a vise to hold the tranny,I used one to take to europe to do a service,it's alot lighter then steel.You can contact me at www.rbttrans.com if you run into a problem. Good Luck
Views: 102
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×