Skip to main content

As many club members know, I am changing out my transmission to a BMW-M1 gear box. Here is a list of parts and their condition as observed by Les Grey from a vehicle performance center in Phoenix, AZ. If this list can in anyway be helpful in rebuilding or �beefing up� your equipment please feel free to contact me at bobbypro@adelphia.net.

ITEM ... Condition ... Price

(1) 4:22 ring & pinion...used/excellent..
$ 1,100.00
(2) 4:22 ring & pinion...NEW...$ 2,600.00
(3) 2nd gear set...used/excellent..$ 850.00
(4) 4th gear set...used/excellent...$ 500.00
(5) 5th gear set...used/fair...$525.00
(6) Limited slip diff assy...used/good...
$ 750.00
(7) ZF main case...used/excellent...$ 450.00
(8) ZF rear case...used/excellent...$ 300.00
(9) Shifter forks and shafts...used/excellent
...$ 100.00
(10) misc. hardware...used ...$ 50.00
(11) Speedo Gr....used/excellent...$ 25.00
(12) Reverse idler gear...used/good...$50.00
(13) Reverse idler gear shaft...
used/excellent...$ 25.00
(14) FZ fill & drain plugs...used/excellent
...$ 5.00 each
(15) Input shaft assy...used/excellent
...$1,000.00
(16) Input seal nose cone...used/excellent
...$ 20.00
(17) Throw out brg. cross shaft...
used/excellent...$ 50.00
(18) ZF long tension bolts...used/excellent
...$ 30.00

* The following parts are damaged - worn out -or in need of some form of repairs and
may not be serviceable after attempted repairs. Some of these items are not usable at all; I am just listing them so you will know their status. *
1._______________________2nd / 3rd gear synchro hub assy
2 _______________________ 4th / 5th gear synchro hub assy
4 _______________________ pinion shaft and input shaft angular contact bearings
5 _______________________ 1st � 2nd � 3rd 4th 5th gear needle roller bearings
6 _______________________ 3rd gear assy and synchro ring
7 _______________________ 5th gear assy and synchro ring; thrust face damaged but possibly repairable.
8 _______________________ Support roller bearing � pinion shaft nose
*********************************************
Components to be �left over from M-1 case�
1)----------- tail cover
2)----------- bottom / top cover
3)----------- gear selector cross shaft
4)----------- right and left gear selector shaft detent and cover housings
5)----------- right and left differential side covers
Original Post
Post
×
×
×
×
Link copied to your clipboard.
×