Reply to "1/4 Window replacement"

Good.  That's the easy one.  It essentially pushes out from the inside.  Only rubber is holding it into the metal ridge that is the frame of the car.  That being said, take your time and be careful when pushing it out.  Squirt both sides with spray lube or silicone and let it sit.  Then start pushing on the corners and you should start to see it budge.  Spray more lube and it should eventually push out as a unit.  The unit being the glass, rubber, and stainless frame come out to the outside of the car as a set.

×
×
×
×