quote:Originally posted by PanteraDoug:
Did you build the intake from scratch or is it modified from Kinsler maybe?
What brand of throttle bodies are they?
Does it include a computer and the sensors?
Doug, that looks kinda what like I had envisoned, only my runners where straight and went into an angled plenum bottom, so it would set lower and the side intakes were going to have two of thos double throttle bodies with injectors under them. So during normal running a low rpm it would inject in just the IR. But at wide open throttle it would inject under the throttle bodies also. Like when the secondaries open on a four barrel. Then I was gonna run tubes from the throttle bodies to the side wall of the frame where inside the frame I would have a K&N filter on the end of each tube. This way it would breath cold outside air instead of hot engine compartment air.