Reply to "#1905 Part Duex"

comp2Member

LOL, cams, not on this engine. Next time you get a cam from comp or crane mic it!!! You might be suprised how off they are and with problems such as dips after the base circle before the lift which is good for a bounce. All within what they call "Acceptable tolerances".

Just general problem of after market parts in general.

We'll get them to make it right; if not for us then the next ones. I don't mine drilling and tapping knew holes; especially since before locating either of the 2 bell housings I was planning on making one from scratch!

7/12/088:00 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...