Bellhousing done with both patterns.
Drilled fine no problems at all.With all of the set up it took about 2 1/2 hours.
The holes catch the edge of the weld so we just went slow when breaking through. Tapped no problem. I tapped it to 3/8NC like the existing holes. My original bellhousing is 10mm-1.50.
Mounts to my ZF perfectly.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.