Reply to "1972 wire harness"

rbarkley671Member

I agree with everything Larry just said but would add that using a "conduction enhancer" on the tips of the fuse and the contacts will make it work even better.

After Zonkey's restoration, which included a very careful cleaning of all fuses and contacts, I had some fuse conduction problems. I tested the resistance with an Ohm meter and the problem ones were quite high (be sure to test with ignition off an preferably battery disconnected) Interestingly, the problems were all in the circuits that I had switched over from load carrying to relays.

I Googled around and found suggestions that an anti-corrosion grease could solve most problems. One that was suggested was "Ox-Gard™ Anti-Oxidant Compound" which can be found at most HW stores (Home Depot and Lowes for sure) and, of course, Amazon: http://www.amazon.com/Gardner-...mpound/dp/B000BODU66. After 10+ years, the single application is still working! A lifetime supply costs just a few bucks

4/22/1611:01 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...