Reply to "351c Weber"

The manifold in your link is the Redline Weber manifold. Its one of 3 manifolds Redline manufactures for the 351C. They've produced that manifold for many years. Redline's Weber manifold uses adapters that allow it to be used with either 48 IDA OR 48IDF Webers.

If you are considering 48IDA Webers, the Hall Pantera manifold is the better choice, there are fewer bolts & gaskets to worry about, and the carbys will sit lower.

If you are considering 48IDF Webers, be forewarned, the IDF adapters for Redline's Weber manifold are so tall that the IDF carbys will not fit below the engine screen. The Cain Weber manifold that AussieSpeed is working on will not have that problem.

Here's some pictures of the Redline manifold with IDF adapters taken at the office of Pantera International:



Here's some images of a Cain manifold: