Reply to "3785 Gets a 400 swap, fabbed 180's and fabbed mufflers"

pittcrewOwner etc. of 3785

I check the fit of the taper assy and the collector rings for alignment then finish weld the taper assy.

Here is the taper tacked to the rings ready for final welding.

If you end up with two pieces that look like lunar landing craft you did it correctly.

Here is a view from the end.I used a 220 grit sanding roll and polished the entire inside of the collector.

9/18/088:52 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...