While the pipes are still tacked in the car I start on the header collector tabs. I use a barrel bolt lock from the hardware store and cut it into the individual tabs. The metal is already formed I just need to bend the ends to fit the curve of the tube.
Here are the pieces all made.
The loop end fits a 5/16 bolt perfect. I will be using 5/16x2 stainless button head bolts with metal lock nuts.
I don’t think the nylon lock nuts will hold up to the heat.
I set them on the pipes using the bar from the kit to align them for tacking.
Here are the tabs tacked in place.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.