The GTS Ansa mufflers have the tips exiting at an angle. I like the look of this so I decided to match the angle with my tips.
I screwed the bottom on to the ends and mounted them into the same fixture I used to square them and welded the jig to locate the tips.
The reason I used a 2 3/8 hole saw on the tip ends of the can is because of the angle the tips.It could not be angled up with a smaller hole. I taped the tips to prevent weld spatter from getting on the chrome and welded them to the ends.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.