Reply to "73-74 upper dash vents"

horacecopeMember

Thanks for the link Goodroc

But if you look at my earlier post I mentioned this same company Car Builder Solutions. As I said, they do a lot of similar vents and if I can't find originals I may have to use something from them.

However while they all look interesting look a bit closer at the info on their vents and there is only really one that will fit into the 75mm hole in the top of the Pantera dash and thats the 100mm Rocking Vane they list.
If you read the info this takes a 63mm ducting tube while the Pantera heater and defrost outlets are 45mm so there will need to be an adaptor of some sort fitted to accommodate these vents to the Pantera heater.

It would save a lot of hassle if I could get originals or copies of the originals from one of the vendors, hence this thread, but if not I may have to look at the above.

Cheers

5/24/1611:28 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...