Reply to "A/C hose information please"

plt-1Member

I tested my car today for the first time at about 2:00 this afternoon. With my radiator completely covered with the new condensor, my car warmed up to 172 at 70 mph and no fan. I drove about five miles and no change, purred right along. Then I pulled over and let it idle and heat up to 200 and drove back out at 70 mph with no fan. It cooled back down to about 178/180 and held there. Then I went light to light for about ten minutes out and ten back with the fan running and it held about 180 the whole time. I guess it may heat up some more when I start running the compressor? But, so far, so good. They couldn't be more helpful over at Nostalgiac Air Parts, they are getting some pretty cold vent temps w/their systems. I want to get one of their evaporators when I do my dash. I hope I can get my vent temps down w/this original evap.

5/18/106:11 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...