Reply to "A/C hose routing..."

panteradougMember

Luigi? Him again?

Probably what happened is these chassis were all built to the same specs in batches initially and things like no longer used brackets, like on mine, didn't get eliminated until the next batch of shells were made after the new location change was made.

Mine, 4460, is no doubt a '72 shell, but an L model.

It has created havoc as a result for me in the past, particularly in the wiring diagrams.

I am told by a knowledgeable source that there are three different wiring harnesses identified.

I do not have the early harness. Not sure if I have the last, or the middle one yet.

I can tell you that the big laminated wiring harness diagram that Hall sells, for me in a few places is wrong. Caused me more then a few melted wires as a result.

I hate this. Wiring is not my strong point.

5/8/134:58 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...