First,remove the bellhousing from the transaxle. Then,measure the distance from the face of the TOB (with it engauged into the fork and all of the way back towards the transaxle) to the mating surface where the bellhousing attaches to the transaxle case. Next,bolt the bellhousing to the engine .Then measure the distance from the mating surface of the bellhousing where the transaxle case attaches to the fingers on the Pressure Plate.
You want the measurements to be .150"-".200" different than each other .(with the first measurement being smaller). As the clutch wears,the fingers will move out towards the transaxle.
Hope this helps.
Ron
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.