Reply to "Advise on shocks and springs."

Mark,
[quote]I'm not sure what you mean by go down to what you want.

My car with a slight pitch in the arm is 13.5 I;m thinking the middle should be about 12.5" on the rear ..I didnt measure the fronts yet. It also leads me to another question on if the upper a arms should be level also .. a question for another post.

Joules ,

The QA1's are available in single adjustable or double adjustable and when I contacted QA1 Tech they recommended the 'DR5855' model, either DR5855P (Single Adjustable) or DDR5855P (Double Adjustable).

I have the QA1's PROMO STAR printed out sitting on my desk .. the DDR5855P ..states they are for the rear and the ride height compressed height at 11.5 only leaves me 1" I may have to drop to the 4855 .. they also state front / rear ?? I;m just slightly lower but think your correct QA1 is right for our application.

The spring rates seem like I need to wiegh my car when its done first ??? I may make up solid bars for it until its done then wiegh the car. But 350 and 450 seems like your on the money.

Ron