Okay, I see what you are referring to now "the gear housing standoffs", but those are basically just three spacers so you could add those back pretty easily if you so wished. What I referred to is the motor mounting which in the alternative method is removed altogether.
In all honesty if you don't want to go cutting anything up then this mod probably isn't for you. Just add the bronze gears to your existing motors and accept the factory rate of up/down of the window. Alternatively start searching for a set of window regulators from a scrap vehicle and keep your own 'as is' or look at Ted Mitchell's aftermarket window regulators.
Julian
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.