Reply to "aerostar window motor upgrade"

liv1sMember

quote:
One install tip I've picked up. Use a pair of small cable clamps to attach the actuator plunger shaft to the Pantera shaft. The kit clamps are evidently not too good.

Actually the clamps that come with the power lock kit is fine in my experience. If you want to insure that they don't get loose, just put some locktite on the rod screw. I've done three Pantera's, including mine, and have had no failures from playing with the remote

Don't spend more than $30 on a keyless entry kit. Ebay is a good source for them starting at $24. If you already have an alarm system installed in your car with a keyless remote, they have provisions for keyless entry, in which case all you need are two 2-wire door lock actuators and relays if the alarm system requires it to reverse polarity on the actuators to lock/unlock.

Sorry for thread-jacking. Probably should start a new thread since we are going off subject.

Aloha

12/14/093:05 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...