Reply to "Air craft style gas filler"

Hi Brad, Yes, I will need ALL the pieces before machining, because I machine your gill for a perfect fit! + or - .010" Some of these cap flanges will 'snap' into place, they fit so perfect. Most of my customers send me their gill(s), purchase the cap and funnel and just have it sent straight to me. To all those who are interested; my email address is panther@starnetdial.net get ahold of me anytime, I check my mail everyday. One more thing; there are NO guarentees! We all know how impossible these 'Gills' are to replace! And how expensive they are, if you can even find one. But did you know that there are at least 2 or 3 different styles, different shapes/curves, different location for the 'ribs' etc. I handle each gill as if it were my own and going on my Pantera. I try my best not to put a single scratch on it, but sometimes things happen that are beyond my control. I have so far had 100% perfect success. I take my time(your paying for it), and do the job right the first time, perfect! I've been machining for over 40 years and take great pride in being a Master Machinist! To all the very best...