Reply to "Alt wiring"

david3449Member

I have a diagram from Tuff Stuff. I put in a 3G alternator from PA Performance . They also sell a box that looks like the stock voltage regulator so the alt warning light still works.
This would be a good time to eliminate the amp meter and upgrade to a expanded scale volt meter. The charge wire should be upgraded at this time. I ran a #4 gauge wire to the battery side of the starter solenoid and got a 120 amp manual reset circuit breaker from Auto Zone. It is installed between the alt and the starter solenoid.
If you add the heavy gauge wire I recommend the stock amp meter will no longer work. A link to the external regulator replacement box for a 3G and idiot light.
https://www.paperformance.com/...iew.asp?idproduct=75
If the wiring diagram for 3G did not attach then will try again.
Link to the alternator I used.
https://www.paperformance.com/...iew.asp?idproduct=46

Attachments

Hide

Files (1)

7078_to_7771_conversion.pdf

9/17/158:10 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...