Reply to "Alternator Light always on"

jag13catMember

Mike H.; From your wiring schematic, you have 12v going to B+ on the alternator from the battery. To have voltage coming from D+ on the alternator to D+ on the regulator, then to the amp light, you must have voltage crossing from B+ to D+ within the alternator (short/open circuit). With a voltmeter have you tested if voltage exists between B+ & D+ with the various conditions you described? You may also check for continuity between B+ & D+ with no voltage from battery. If continuity exists, then B+ & D+ are connected someway within the alternator.

2/23/182:38 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...