I am going to set up an adjustable jig with threaded mounts and incrimination to I can build tubular a-arms. If they are not within range I can dial the jig a little and whip out another set. If I change rim set I can change the a-arms so to not need spacers.
Problem with rod ends, or what ever you call them, most I have found are English while the bolt in the pantera is metric around a .48" hole. It would be nice to use something common and commercial but it would not be hard to fab your own.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.