Another Cooling System Question

I am modifying my cooling system per the plans I found on the forum. I do not want to put vents in my hood. So I am trying to optimize everything I can.

The small Bottle has been sealed off with an air bleed at the top. The filler neck moved to the tall tank and 2 air bleed fittings added towards the top of that tank.

Questions:
1) Do I need to adjust where either of these tanks sit in the stock mounting locations? (As in raise the tall tank so it is highter in the system.)
2) Do I keep the overflow tube that comes out of the filler neck just below the cap on the tall tank?.
3) How do you suggest I fill the system with these modifications? (I do have a tool that draws a vacuum and fills at the filler neck.)
4) Is there any advantage to leaning the radiator forward if I do not have hood vents.

11/17/103:57 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...