Reply to "Battery drop down Box"

tyler5Member

Hey paul
my box is 7" x 16 1/2" with a droped trunk pan by 1" keeping this in mind the actual width of the batt. box is wider due to the angle of the rt. wheel well. i also welded the front side of the box to the steering rack support after bending the edge down. this will actually reinforce the support and trunk floor and take a huge battery. run your cable thru the rt side front panel at batt. level and you cant get much cleaner than that. i did move the clutch line. and i dont have power brakes but you will have to move that line also. will have so many pics of all the changes down the road. Larry

8/25/094:50 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...