Reply to "Battery drop down box"

marlinjackThe Machinist #5723 AMARGOSA MACHINE 'Running on Empty- Middle of Nowhere'

...Yes! A suggestion! Measure THREE times and CUT Only ONCE!!! I used a SabreSaw and a Sawsall. It took me Three Months to get up the Nerve to Cut the Trunk floor. The Battery has to fit right between the Rack and pinion Mounts; and BACK right up against the 'Foot Bulkhead'. The Clutch Master Cylinder must be at Least, LOOSENED, for clearance, in order to install and remove the Battery from then, On. The UP side: The Lowered Weight (30-40 lbs lowered 12 Inches), and Center of gravity in the Nose, will be a Pleasure that You will feel the very first time You 'Dive' into Your favorite Hard Corner; and forever After. Be very sure You Protect the Positive terminal from ever touching the Ground!!! Especially if you have a Battery with Both Top and Side Posts! And Engineer a Good 'Hold down strap'. Would I do 'IT' again? Absolutely! In a HeartBeat! Without Hesitation!! It was THAT Great of an improvement in Cornering Response! Good-Luck with it!...

2/6/088:28 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...