Reply to "blinkers and taillights,,,same circuit/fuse?"

If you have the front parking lights and front markers, but don't have the tail lights, rear markers, and license plate lights, then the problem is the nylon wiring connector that is located by the coolant tanks.

The front parking lights, tail lights, side markers, license plate lights, and the indicator light in the tach (lower right) are split between fuses #3 & #4.

F3:
RF parking and marker
LR tail and marker
R license plate light
Dash lights
Back up light switch

F4:
LF parking and marker
RR tail and marker
L license plate light
Lights indicator in tach (lower right)


The turn signals are fed from fuse #12. There is a possibility that there may be a bad connection inside the hazard warning switch.

When you first turn on the turn signals, does the directional indicator in the tach (bottom center) light once or twice and then stop? If so, then there is a problem with your turn signal flasher.

The key needs to be on (second click) for the turn signals to work, but the key does not have to be on for the parking lights to work.

The above assumes that the wiring is original and unmolested.

Let us know what you find.

John