Reply to "Bodywork questions."

peterfenlonMember

Well I must say it went far better than I ever thought it would I managed it by,

lifting the rubber on the outside of the screen softening the sealer with WD40 all the way around
so I could run a steel 6" rule around the whole
windscreen.

I then squirted copious amounts of soapy liuid around the same place.

From the inside i made sure the top and both ides of the rubber would peel back easily, and down the both sides I held the rubber away with 3 pieces of thin steel.

Pressing gently along the top of the screen it popped out easily, with the help of her indoors (Wife) we then carried it to the front garden.

The side gutter strips were more difficult, but again with WD40 and a 6" rule gradually easing it away from the body, it finally submitted.

I did find that drilling off the pop rivet heads still held the gutter though so then I drilled the whole rivets out.
Many thanks to all for their help, it WAS needed and appreciated.

6/29/168:38 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...