> Dan, that Edelbrock manifold is designed for a 9.2" Windsor block, does the
> rear of lifter valley pan have a wide sealing area so it can seal up the
> inward curving Cleveland block too?
The AH-II has dual end seal rails on the bottom side like many of the Ford
Motorsport intakes. Here's a picture comparing the bottom of a M-9424-C351
intake for a 9.5" deck and the AH-II for a 9.2" deck. You can see the end
seal rails:
http://www.bacomatic.org/gallery/Fontana-Engine-Builc/C...s_Victor_AHII_bottom
The Victor AH-II also has a Windsor like thermostat neck:
http://www.bacomatic.org/gallery/Fontana-Engine-Builc/C...vs_Victor_AHII_front
which can be removed as shown in this picture:
http://www.panteraplace.com/Pantera%20Pics/dans%20intake%20109.JPG
Dan Jones
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.