Dan,
I am also using Crane Gold Roller rockers with a roller cam. You mentioned the rocker arm ratio's. I'm using the stock 1.73 rocker and I know that different ratios can change cam lift but have not quite understood something. I take it that the different length of rocker is on the pushrod side of the rocker stud. This is because you need to keep the same distance from the stud to the valve stem, right? Thanks for the lesson.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.