Reply to "Build Your Own 91 octane, 500 HP, 377CID CLEVELAND?"

sickcatMember

Hi all,
We are back on line for the build! My Crank grinder had some serios health issue's in there family so we had to wait, the crank is complete and has measured out at 3.700", was heat treated, hardened and ground, these guy's do excellent work.
I had to decide on rods today, Chevy titanium or Callies H beam, I decided on the Callies @ 6.125".
We also picked the Forged pistons today as Probe #14617, .020" over standard,
We cc'd the 1970 4V heads DOAE-N @ 61.5cc to 62cc's, this will yield approx 10.6:1 compression ratio,

If you need some advice my engine guy is; Keith at Rancho Performance Machine, 28073 Diaz Rd, suite I, Temecula Ca 92590, 951-676-9292.

Mark

8/15/081:27 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...