Reply to "Bump Steer Spacers"

When you add 10mm spacers under the rack, you lower it. So the Bill Stroppe rack-brace shown no longer fits. And because the rack is lowered, you need 10mm longer rack-mounting bolts, unless you cut 10mm off the step areas of the stock brackets where the 4 bolts seat. Finally, don't forget all this requires realigning the front wheels. Stock alignment specs assume 185-70x 15 bias-belted tires so if you're using wider radial tires, you get to experiment with toe-in, caster & camber to your liking.