I had a noise similar to what you're describing
I found the distributor gear did not have sufficient free play on the bottom side where it rides on the block ledge
I also found the drive gear on the cam severely worn
simple test would be to place a shim between the distributor housing & the block. if the situation is just barely in bind a .015" shim ~might~ do the trick?
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.