Dear members,
I'm in search for a hydraulic roller camshaft for my Longchamp and would be very grateful for any feedback and thoughts. The engine seems to be mostly original (CF-block, dual plane 76da-9425-cb intake, standard exhaust and probably 2v 351c open chamber aussie heads), but the carburetor have been changed to a Edelbrock Thunder AVS 1806s. My goal for the cam is good low end torque and horsepower in the RPM range 1500-5800.
I'm already in possession of a set of Ford Racing M-6564-C351 roller rockers and COMP Cams 924-16 dual valve springs.
At the moment I'm considering either the Lunati Voodoo 20320710:
Duration @ .050 (Int/Exh): 211/219
Gross Valve Lift (Int/Exh): .559/.559
LSA/ICL: 112/106
RPM Range: 1600-5600
Duration @ .050 (Int/Exh): 217/225
Gross Valve Lift (Int/Exh): .571/.577
LSA/ICL: 110/106
RPM Range: 1600-5600
Which one would you recommend me to aquire? I'm also open for other cams (Crane cams etc).
Will there be any problems with the lift and the roller rockers? If possible I want to use the standard 5/16" bolts. The spring rate for the COMP Cams 924 is 347 lbs./in.
Best regards,
Robert