quote:There are 2 bolts inside the bell housing that can't be accessed until the bell housing is removed. I elected to re-install them. I figured there must be a reason ZF designed it that way.
I concur on this and didn't like the thought of nothing supporting the lower ZF to bellhousing, especially when its a bending moment between two supports (i.e. engine and ZF mounts). At the end of the day it's pretty simple to remove the ZF and bellhousing as a unit. The only additional work is removing the clutch slave and starter motor.
quote:The engine mounts need to be loosened and it's very close over the a/c condenser.
Unbolt the condenser and swing it out of the way