centreforce clutch release bearing

horacecopeMember

Have read a couple of archive posts on this subject and I'm now a bit confused.

I ordered a centreforce clutch for a Detomaso Pantera from Summit, part no DF021057S, I also have the stock flywheel.

The archive posts talk about needing to replace the flywheel or have it redrilled for this particular clutch. However this one bolts straight onto my flywheel even though the new disc is 10.5". The old clutch was the 3 finger type with 11" disc

Question: The archive posts are a few years old so have centreforce now modified the pressure plate correctly for the Pantera and stock flywheel.
Also can I still use my stock release bearing and carrier which looks in pretty good condition, part no BCA 1625-12. If not whats the part no for the correct replacement.

Cheers
Horace

1/24/161:00 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...