Reply to "CHI 3V Single Plane Intake Needed for Dyno Project"

p-maximusMember

Hey Panterasteve, the spacers make up the difference in port height. But as far as other manifolds fitting they need to be on the order of a 2V intake port size. The weiand 7516 is a 2V port size and fits with little modification. As far as other 2V port manifolds fitting they might, but I don't know for sure. As far as using your weber intake you say it's for 4V heads so the ports will be off. Thats not to say you could not fill the manifolds ports and blend them to fit it the right way. You should be able to get the spacers direct from the CHI suppliers . That's where I got mine when I bought the heads. The plates are held to the heads with two screws each and the end rails with three roll pins each they fit very well.

Any more info let me know, MAXIMUS

11/16/088:15 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...