Reply to "Clear Coating used Polished Edelbrock Intake Manifold to Prevent Tarnish? Advice?"

Ron.
This past winter I polished the ZF, then tried to use the POR-15 2 part clear coat. This did not work well as it swelled and fish eyed over perfect surfaces that had survived pnuematic sanding from 200 to 600 grit and using their degreaser and metal prep. IN the end I called the folks at Zoops. And that is what I am now using. I applied 2 coats. And now when I detail the engine bay I use just plan water and a sponge to clean the ZF. The Zoop seal still has the ZF shining. But the Zoop seal does nothing to protect the ZF from scratches, hence the sponge bathing. So far about 3 months in service and no complaints. You can also re-apply the Zoop seal in the future. Not bad. .................Regards...Doug.H