Reply to ""Clunk" after gear change and gas"

rmccallMember

Take out the two small rubber plugs on the bottom of the shift box to allow you to have access to the two 5mm grub screws holding the shift rod to the linkage. Next,slide the rod out. With the trans in Neutral,gently pry the linkage towards you to allow the first piece of linkage to come free. Remove the 19mm nut, linkage and keyway from cross shaft. remove three 13mm bolts and one 6mm Allen bolt securing the shift box to the trans. Remove shift box paying attention to the shims between the box and the front section of the case.( where the 6mm Allen bolt went through.)
Easy enough?

Ron

10/30/139:37 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...