Reply to "Clutch adjustment?"

peterfenlonMember

Thanks to all for your input, I didn't want lads to have "words" or bandy their handbags.

I am as you can imagine extremely cheesed of with the situation, and apologies for prolonging the agony.

Today I removed the ERKit and fitted the rod that came with the new master from Roland Jaeckel.

With this I adjusted the pedal to be about half an inch higher than the brake pedal, bled the system, and measured slave cylinder movement at 13mm (again).

But after the good lady had returned to the kitchen I did note that the first one and a half inches of pedal travel are a little soft before becoming solid.

Tomorrow I shall jack up the front a little and bleed again. then check if 16mm is possible using a long tube over the actuating arm.

By the way the pedal when fully depressed is not near the carpet.

Episode 149 commences tomorrow evening UK time.

12/28/1611:35 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...