Clutch advice needed

noquarterMember

Can anybody help me, I'm confused? It's about adjusting the clutch, and we all know that is a critical topic, it has to be just right.

The problem is that there are different instructions:
1. In the blue Pantera Owner Manual on page 62 it says to move the withdrawal lever until contact is felt, and then adjust withdrawal lever stop screw to 0.102-0.106 in.
http://www.panteraplace.com/page124.htm says the same I think, though they add that it's easier if the return spring is removed.
2. But the TSB 10, page 9 says to adjust to same gap but nothing about moving the withdrawal lever, just to do it when cluctch is resting

My guess would be that these 2 methods produce much different results. And my guess would be that if method 1 is used, then at rest the withdrawal lever would be touching the bolt, and thereby avoiding the slave cylinder piston bottoming.

Can anybody shed light on this please?

10/20/078:02 AM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...